Rendering
Adelaide.

Rendering is a cementitious coating system — sand, cement, lime and polymer modifiers — built up across two to four coats and finished by hand to give an exterior wall its final architectural surface.

Hand-floating render across Adelaide for over a decade, we work across new builds, brick renovations, lightweight cladding systems (Hebel, polystyrene, blue board) and architectural facades. We work in both traditional cement render and modern acrylic and polymer-modified systems — chosen by substrate and brief, not by what is fastest.

Done well, render is not a coating that sits on a wall. It is a continuous mineral surface, three to twenty millimetres thick, that becomes part of the building’s structure. It weathers slowly, repairs in place, and gives a brick or panel exterior a depth no paint can match. It is the exterior counterpart to our Venetian plaster and microcement work.

Our rendering services Adelaide-wide cover a family of related systems — different chemistries, different thicknesses, different substrates. We specify and apply all five, matched to the wall it lives on and the brief it serves.

Polymer-modified system, 3–5 mm thick. Pre-tinted, crack-resistant — the workhorse for new builds, Hebel and polystyrene.

Sand, cement and lime applied 15–20 mm thick across two or three coats. Breathable, traditional, painted after curing.

Cement render with acrylic polymers and fibreglass mesh. The choice for movement-prone substrates and joints.

Fine, medium or coarse aggregate finish. Trowelled or sponged for tactile depth — the texture coating layer over a sound base.

Smooth, hand-trowelled finish — no spray, no roller. Our signature system for considered architectural facades.

Render does what paint cannot: it transforms an exterior. A solid mineral surface, bonded to the wall, that takes weather, takes time, and gives a brick or panel facade the architectural depth it was built for. Done by hand, it ages quietly — a finish, not a coating.

We handle Rendering Adelaide projects for private homeowners, architects, interior designers, builders and commercial developers across South Australia — from single-wall feature renders to whole-of-house new builds and full hospitality fit-outs.

House rendering Adelaide projects — whole-house render for new builds, full re-renders over existing brick, single feature walls and pool surrounds. Sample boards prepared on site, in the actual light, before any commitment.

Hospitality facades, retail shopfronts, day-spa exteriors and considered commercial buildings across Adelaide. Specification documents, sample kits and trade pricing supplied to architects and builders on request.

Rendering Adelaide projects typically take seven to fourteen days for a single-storey house; a two-storey build runs two to three weeks. Most of the time is preparation and curing — render needs to set fully between coats. Every layer hand-floated, never sprayed for the finish coat.

We assess substrate, exposure, height and access. Honest advice on which render system suits the wall and the budget.

Sample boards in the proposed render and colour, reviewed on site in the actual light. Before any commitment is made.

Acid-wash brick, prime, mesh joints and movement points, set up scaffolding. The unseen work that determines the outcome.

Scratch coat and level coat applied in two to three layers, each fully cured before the next. This is what a render lasts on.

Hand-floated finish coat with optional sand or texture, finished with a UV-stable sealer or topcoat to specification.

Rendering Adelaide projects are priced per square metre and vary by system, substrate condition, height and access. Scaffolding, two-storey work and difficult access are scoped separately. Every project is quoted bespoke after a site visit — these tiers are a guide only.

From mid range

Pre-tinted polymer system over Hebel, polystyrene or blue board. Fastest turnaround, most popular for new builds.

Mid to upper

Traditional cement render over brick, hand-floated and painted. Our everyday architectural facade work.

Premium

Lime-mortar render for conservation and heritage work. Period-correct, breathable, bespoke colour-matched to original.

Every rendering project is quoted on site. Sample boards included. No obligation.

A properly applied render asks little. We provide a care card with every project — the short version is below.

A short selection of recent Adelaide rendering projects — new builds, brick re-renders and architectural facades. The full portfolio sits on our projects page.

Based in Adelaide, working across Greater Adelaide, the Adelaide Hills and the Fleurieu Peninsula. Some of the suburbs we know well for house rendering and facade work.

Burnside

Unley

Stirling

Norwood

Walkerville

Toorak Gardens

North Adelaide

St Morris

Glenelg

Hyde Park

Henley Beach

Magill

The work speaks for itself. So do the clients who have lived with it.

Quotes for our rendering services Adelaide-wide are obligation-free and usually returned within three working days. Sample boards are prepared on site, in the actual light, before any commitment is made.